- Exterior 2×6 Framed Walls 16” OC Spacing
- 1×8 Cedar Siding
- ½” Wall sheathing
- Interior 2×4 & 2×6 Framed Walls 16” OC Spacing
- 2×6 PT Mudsill
- TJI Main Level Floor Joists
- TJI Main Level Blocking
- TimberStrand Main Level Rim Joists
- ¾” T&G Main Level Subfloor
- Glu-Lam Loft Beams (exposed)
- 2×6 SPF Loft Deck Boards (exposed, V-notched, T&G)
- 2×4 Loft Sleepers
- ¾” Plywood Loft Subfloor/Underlayment
- Glu-Lam Posts (w/connective hardware)
- Glu-Lam Roof Beams (exposed)
- Purlin Wedges
- 2×6 SPF Loft Roof Boards (exposed, V-notched, T&G)
- 15lb. Building Felt (above 2×6 Roof Boards)
- 3-1/2” Rigid Insulation w/Furring (Approx. R-30)
- ½” Roof Sheathing
- 15lb. Building Felt (above Roof Sheathing)
- 30 Year Fiberglass Reinforced Shingles
- Roof/Wall Flashing
- 2x Rough Sawn Cedar Barge & Fascia Boards
- “Milgard” Brand Vinyl Windows, Insulating Glass, Screens
- “Milgard” Brand Sliding Glass Door (if any on plan), Insulating Glass, Screen
- 1×4 Rough Sawn Cedar Window Trim
- 6-Panel Fir, Exterior Grade Front Door (pre-hung, weather strip w/adj sill)
- 6-Panel Fir, Interior Doors (pre-hung)
- Stairs from Main Level to Loft Level: (if loft design)
- 2×12 HF Stair Stringers
- 5/4” PB Stair Treads
- 1×8 Pine Stair Risers
- 2×6 Clear Pine Stair Railing
- 2×2 Clear Pine or Fir Stair Balusters
- 1×3 Nominal Clear Oak or Cedar Base Trim
- 1×3 Nominal Clear Oak or Cedar Window & Door Trim
- 1×2 Nominal Clear Oak or Cedar Beam Wrap Trim
- 1×8 Cedar Siding at Rim Joist
- Caulking for Exterior
- Adhesive for Floors
- Shipping of Materials to jobsite (FOB)
- Plans (engineering, if any, not included)
All materials begin on main level – subject to change without notice
2-25-2004
